back to Home page |
|
Card Readers for
Magstripe & Barcode
Scans
bar codes
The Omni scans bar codes printed on paper, card stock, or
plastic. An infrared option is available for security-based applications, where bar codes
are overprinted to prevent duplication.
Three
Units Available
The Omni reads up to three tracks of information with a single
swipe in either direction. You can purchase the barcode only reader, the magnetic stripe
only reader, or the combination reader. In combination, the same Omni unit can read
both bar code and magnetic stripe media. TTL, RS-232, keyboard wedge, USB/Keyboard, and
Weigand interfaces are available.
Stands
up to heavy use
The Omni reader is designed for demanding applications, such as
for access control or in self-service kiosks. Its die-cast metal base, stainless steel
wearplate, and impact-resistant housing make it ideal for stand-alone, high-volume
traffic. Its metal base can be securely mounted with screws, and cable exits are avaliable
at the side, end, or bottom of the unit. A weatherproof/extended temperature version is
also available for use in harsh environments.
Edits
and formats data
The Omni can be programmed to divide, rearrange, edit, and
validate fields of scanned data. In addition, it allows for up to 16 preamble or postamble
characters. Data editing for the Weigand interface can be programmed with an optional
RS-232 adaptor cable.
Barcode Slot Scanner KB
List Price: $299 PMI PRICE: $209
Magnetic Stripe Slot Scanner KB
List Price: $269 PMI PRICE: $188
Combo Barcode/Mag Stripe Slot Scanner KB
List Price: $429 PMI PRICE: $279
|
| |
|
| Electronics
MTBF |
Read electronics,
bar code: 30,000 POH. Read electronics, magnetic: 50,000 POH.
Interface electronics, RS232/Keyboard: 50,000 POH. |
| Magnetic Head
Life |
500,000 passes
minimum. (1,000,000 passes available.) |
| Rail and Cover
Life |
1,000,000 passes
minimum. |
| Magnetic Read
Rate |
Less than one
error in 100,000 bits on cards conforming to ISO 7811 1-5 (not induced by operator error).
|
| Warranty |
One year, parts
and labor. |
|
| |
|
| Bar Code Source Light |
Visible red 660nm or Infrared
930nm. |
| Minimum Bar Code PCS |
60% |
| Bar Code Centerline |
.49 inches (12.50mm) from
bottom of slot to center of reading window. |
| Bar Code Resolution |
.006 inches (6mil) minimum. |
| Magnetic Stripe Formats |
ISO 7811, AAMVA, and CA DMV. |
| Swipe Speed |
Bar Code: 5 to 65 inches per
second, bi-directional.
Magnetic Stripe: 5 to 55 inches per second, bi-directional (normal density). |
| Media Thickness |
Bar Code media: .005 to .055
inches.
Magnetic Stripe media: .01 to .055 inches. |
| Slot Width |
.055 (1.37mm). |
| Interfaces |
RS-232/Keyboard wedge/USB
(AT/XT, PS2, Mac, and many others) TTL (undecoded magnetics and/or Bar Code), Standard SIA
26-bit Weigand. USB interface can be configured via the keyboard wedge/USB (AT/XT, PS2,
Mac). USB interface can be configured via the keyboard with the USB/Keyboard setup
Utility. USB interface and setup utility supported though Windows 98 and Windows 2000. |
| Dimensions |
Length: 5 inches (127mm).
Width: 2.05 inches (52mm). Height: 1.38 inches (35mm). |
| Weight |
1.4 lb. (including power
pack). |
| Cable Length |
6-foot straight cable. |
| Connector |
Keyboard: Combination 5 pin/6
pin DIN. TTL: 9 pin squeeze. RS232: DB9F. TTL Mag/BC
Combo Readers: unterminated cable. |
|
